|
As the 77-78 Honda 750 F2
has an 18% larger combustion chamber to compensate for the larger
valves, through the years many people have installed the standard 836cc
(ex: Wiseco K836) kits for the 69-76 engines only to discover that the
compression was too low to give them the extra power that they were
after.
Dynoman offers our custom 836cc piston kit for the F2. It has the
correct dome to raise the compression to a true 10.5:1.
These
pistons are state of the art diamond cut on CNC machines in the USA from 2618 aluminum
forgings. This is the same alloy used in many prostock pistons. This process
makes them lighter than some of the cast pistons used in the 70s, but much
stronger. They also come with a brushed dome to smooth any sharp edges.
The
piston features large valve pockets for the 31 and 34mm valves used in the F2
engines. They also have
contact reduction grooves above the top ring for pre-ignition control, and
accumulator grooves below the top ring for better ring control.
They
are the same bore size as the standard Wiseco K836cc kit, so they are a drop in
for any F2 with the standard K836 Wiseco kit already installed.
Made in the U.S.A.
* TECH SHEET *
With the DP836/f2 Kit
Dynoman Recommends;
Webcam #41 Camshaft
DP Custom Stainless Valves
DP Titanium Valve Spring Retainers and HD
Valve Springs
Carrillo Rods
(for aggressive street riding or racing)......
email us about special package
prices!
|
