Dynoman Performance - Austin Texas - Motorcycle Racing Parts


Shop by Model at Dynoman Performance
- CB750 SOHC
- CB750 F2
- CB750/900/1100F
- NT650GT HAWK
- CB500/550/650
- CB350/400F
- KZ900/1000/GPz
- ZRX1100 / 1200
- GS1000
- GS1100/1150

~ All other bikes please
  choose from the menus
  below!


Shop at Dynoman Performance

ENGINE PACKAGES
- CB750/900F/CB1100F
- CB750 SOHC
- CB750 F2
- CB550 / CB500
- KZ900 / 1000
- GS1000
- GS1100

ENGINE PARTS
- Camshafts
- Cam Sprockets
- Clutches
- Connecting Rods
- Cylinder Sleeves
- Gasket Sets
- Gaskets,
Head & Base
- Piston Kits
- Rings
  Sleeves
- Studs,
Top & Bottom
- Valves
- Valve Train
- More...

CARBURETION
- Keihin CR
- Keihin FCR
- Keihin Accessories
- Mikuni RS
- Air Filters
- Push/Pull Throttles
- Vent Filters
- Intake Manifolds
- Dynojet Jet Kits
- Pingel Petcocks
- Carb Sync Tool
- More...

IGNITION
- Dyna 2000
- Dyna S
- Dyna Coils
- Dyna Wires
- NGK Spark Plugs
- Dyna Rev Limiter
- More...

EXHAUST
- Kerker / Supertrapp
- Baffles

SUSPENSION
- Ohlins Shocks
- Progressive Shocks
- Steering Dampers

BRAKES
- EBC Brakes


Shop for motorcycle parts at Dynoman
- Barnett Clutches
- Carrillo Rods
- Cometic Gaskets
- CP Pistons
- Dyna Ignitions
- EBC Brakes
- Falicon Rods
- JE Pistons
- K&N Filters
- Keihin Carbs
- Kerker Headers
- Kibblewhite
(KPMI)
- Mikuni Carbs
- NGK Plugs
- Ohlins Shocks
- Pingel Petcocks
- Progressive Shocks
- Vesrah Gaskets
- WebCam Cams
- Wiseco Pistons


Contact Dynoman Performance
- Order Information
- Technical Sheets
- FAQ
- Customer Builds
- Contact


VALVE TRAIN COMPONENTS
CAM FOLLOWERS  |  RETAINERS  |  VALVE SPRINGS  |  VALVE GUIDE SEALS  | VALVE GUIDES & more

Made in the U.S.A.!                   Visit our VALVES page

HONDA KAWASAKI SUZUKI YAMAHA
 CB750/900/1100 DOHC KZ900 / 1000 GS1000 FJ1100 / 1200
CB750 SOHC (excluding F2) KZ1000J GS1100 / 750 VMAX
CB750 F2 1977-78 GPz1100 GSXR1300 XS1100
NT650GT HAWK KZ650/KZ750    
CB650
ZRX1100/1200 
   
CB500/CB550      
CB350 / 400F      
Honda   HONDA
CB750 F/K/C DOHC 1979-82
CB900F DOHC 1981-82
CB1000 DOHC 1983
CB1100F DOHC 1983
KPMI Cam Followers KPMI Cam Followers
    (buckets or tappets)
    #30-1020

   
MUST be used with Ti Retainers (below)
    Shim-on-bottom type

    set of (16)
    about KPMI products

   
Retail $609.00
    DP Price $519.95

For:
CB750 F/K/C DOHC 1979-82
CB900F DOHC 1981-82
CB1000 DOHC 1983
CB1100F DOHC 1983


$519.95
 
KPMI Titanium RetainersKPMI 30-1019
 
  #30-1019
    set of 16, for use with shim-on
    bottom followers shown above
    about KPMI products

   
Retail $288.00
    DP Price $239.95


For:
CB750 F/K/C DOHC 1979-82
CB900F DOHC 1981-82
CB1000 DOHC 1983
CB1100F DOHC 1983


$239.95
 
KPMI Valve Springs
   #30-1017
    set of 16


    Retail $150.00
    DP Price $119.95


For:
CB750 F/K/C DOHC 1979-82
CB900F DOHC 1981-82
CB1000 DOHC 1983
CB1100F DOHC 1983


Related items: Cams - Valves - Valve Guides - Gaskets

 

$119.95
DP VALVE SHIM KITDP Valve Shim Kit
   9.48mm diameter size

   For shim-on-bottom aftermarket follower
   applications such as the KPMI kit shown above
   Will not work in original equipment shim-on-top followers!!

   For Honda CB750/900/1100 DOHC engines.
  
   May also be used in any other application
   that requires 9.48mm valve shims

   3 each of sizes 1.20 to 3.50 in five point increments
   $84.95

   *Not for use with Original Equipment followers

 

 


$84.95
KPMI Valve Stem Seals - Pure Viton®KPMI Viton Valve Guide Seal
KPMI Red 100% Viton® valve stem seals are designed to have optimum fitment, allow for maximum lift, and to give maximum life. Resistant to high temperatures, petroleum products and the corrosive gasses that are the by-products of combustion. These seals retain their ability to seal in situations where other materials could harden and allow oil to enter the combustion chamber causing detonation, carbon build up and a loss of power. The Red Ones are truly the racer’s choice.
    #700-100016, set of (16), 5.5mm stem

    DP Price $79.84


For:
CB750 F/K/C DOHC 1979-82
CB900F DOHC 1981-82
CB1000 DOHC 1983
CB1100F DOHC 1983





$79.84
KPMI VALVE GUIDES
   Set of (8), for complete set please order quantity "2"
   Must be honed, C63000 Nickel Bronze
   #30-4071

KPMI retail    $153.00
DP price  $124.95

For:
CB750 F/K/C DOHC 1979-82
CB900F DOHC 1981-82
CB1000 DOHC 1983
CB1100F DOHC 1983

Valve Guide Hone

1969-78 CB750K SOHC
1975-76 CB750F SOHC
DP High Performance Valve Springs
   DP VS040813Dynoman Valve Springs for CB750 SOHC

   Fits 1969-78 F/K/A
   High Performance Racing Valve Springs
   Made to our specifications by Kibblewhite in the USA!
   Great for even the most radical high lift cams!

*1977-78 CB750 F2 must use copper washer to achieve
   correct stacking height (included inside spring box)


    DP Price $64.95

$64.95
KPMI Valve Springs
   Fits 1969-78 CB750 F/K/A (all models and years)
   #30-0307
   set of 8, inner and outer springs
  *1977-78 CB750 F2 must use copper washer to achieve
    correct stacking height (included inside spring box)
  
   Retail $86.74
    DP Price $74.95

For:
1969-78 CB750K
1975-76 CB750F
1977-78 CB750F2*

$74.95
KPMI Titanium Retainers
   #30-0308
   set of 8DP Ti Retainers
   about KPMI products

   Retail $235.00
    DP Price $179.95


For:
1969-78 CB750 K
1975-76 CB750 F




$179.95
HARDWELDED ROCKER ARMS
Order and information HERE

 

TSUBAKI CAM CHAINSTsubaki Cam Chains at Dynoman
Tsubaki 94 Link HD Cam Chain
CB750 SOHC engines 1969-78 F&K all
Straight side plates
Limited availability

 

This item is now only available for sale to our customers purchasing Performance Packages
KPMI Valve Stem Seals - Pure Viton®KPMI Viton Valve Guide Seal
KPMI Red 100% Viton® valve stem seals are designed to have optimum fitment, allow for maximum lift, and to give maximum life. Resistant to high temperatures, petroleum products and the corrosive gasses that are the by-products of combustion. These seals retain their ability to seal in situations where other materials could harden and allow oil to enter the combustion chamber causing detonation, carbon build up and a loss of power. The Red Ones are truly the racer’s choice.
    #700-100018, set of (8), 6.5mm stem

    DP Price $39.92


For:
1969-78 CB750 K
1975-76 CB750 F
1977-78 CB750 F2




$39.92
DP VALVE GUIDES - set of (4)
#DP VG-SOHC1
Dynoman 1/2 set of (4) Guides
   Intake or Exhaust
   Pre-honed, custom made for us in the USA by
   Kibblewhite using AMPCO 45 - the best valve guide
   material money can buy!
   $49.95


For:
1969-78 CB750 K
1975-76 CB750 F
1977-78 CB750 F2

DP VALVE GUIDES - set of (8)
#DP VG-SOHC
Dynoman Complete set of (8) Guides
   Pre-honed, custom made for us in the USA by
   Kibblewhite using AMPCO 45 - the best valve guide
   material money can buy!
   $89.95


For:
1969-78 CB750 K
1975-76 CB750 F
1977-78 CB750 F2



DP OVERSIZED VALVE GUIDESDynoman Valve Guides
   Sold EACH
   +.002"

   Pre-honed, custom made for us in the USA by
   Kibblewhite using AMPCO 45 - the best
   valve guide material money can buy!
   0.4778" x 1.800" x 0.2595"
   $19.95 each

For:
1969-78 CB750 K
1975-76 CB750 F
1977-78 CB750 F2

Out-of-stock
Please email us for options
KPMI VALVE GUIDES    INTAKE
   set of (4) Intake Guides
   Must be honed, C63000 Nickel Bronze
   #30-0379

KPMI retail   $100.00
DP Price   $74.95

For:
1969-78 CB750 K
1975-76 CB750 F
1977-78 CB750 F2

 
KPMI VALVE GUIDES    EXHAUST
   set of (4) Exhaust Guides
   Must be honed, C63000 Nickel Bronze
   #30-0383

   KPMI retail   $100.00
   DP Price   $74.95

For:
1969-78 CB750 K
1975-76 CB750 F
1977-78 CB750 F2


CB750 F2 SOHC 1977-78
DP High Performance Valve Springs
    DP VS040813Dynoman Valve Springs for CB750 SOHC

   Fits 1969-78 F/K/A
   High Performance Racing Valve Springs
   Made to our specifications by Kibblewhite in the USA!
   Great for even the most radical high lift cams!

*1977-78 CB750 F2 must use copper washer to achieve
   correct stacking height (included inside spring box)


    DP Price $64.95

KPMI Valve Springs
   set of 8
   about KPMI products

   Retail $86.74
    DP Price $74.95


*1977-78 CB750 F2 must use copper washer to achieve
   correct stacking height for springs (included inside spring box)


$74.95
DP Titanium RetainersDP Ti Retainers for CB750 F2
    set of 8
    Finest quality American-made

    $149.95


$149.95
HARDWELDED ROCKER ARMS
Order and information HERE

 
TSUBAKI CAM CHAINSTsubaki Cam Chains at Dynoman
94 Link HD Cam Chain
CB750 SOHC engines 1969-78 F&K all
Straight side plates
Limited availability


This item is now only available for sale to our customers purchasing Performance Packages
DP VALVE GUIDES - set of (4)
#DP VG-SOHC1
Dynoman 1/2 set of (4) Guides
   Intake or Exhaust
   Pre-honed, custom made for us in the USA by
   Kibblewhite using AMPCO 45 - the best valve guide
   material money can buy!
   $49.95


For:
1969-78 CB750 K
1975-76 CB750 F
1977-78 CB750 F2

DP VALVE GUIDES - set of (8)
#DP VG-SOHC
Dynoman Complete set of (8) Guides
   Pre-honed, custom made for us in the USA by
   Kibblewhite using AMPCO 45 - the best valve guide
   material money can buy!
   $89.95


For:
1969-78 CB750 K
1975-76 CB750 F
1977-78 CB750 F2



MORE VALVE GUIDES

KPMI Valve Stem Seals - Pure Viton®KPMI Viton Valve Guide Seal
KPMI Red 100% Viton® valve stem seals are designed to have optimum fitment, allow for maximum lift, and to give maximum life. Resistant to high temperatures, petroleum products and the corrosive gasses that are the by-products of combustion. These seals retain their ability to seal in situations where other materials could harden and allow oil to enter the combustion chamber causing detonation, carbon build up and a loss of power. The Red Ones are truly the racer’s choice.
    #700-100018, set of (8), 6.5mm stem

    DP Price $39.92

For: 1977-78 CB750 F2
$39.92
Valve Spring Keepers (Collets)
    set of 16
This item has been discontinued by Honda as of March 2013

For: 1977-78 CB750 F2





NT650GT HAWK 1988-91  
KPMI Racing Valve Springs w/Titanium Retainers
   #30-3070Kibblewhite Racing Valve Springs for NT650GT Honda at Dynoman
   Kit includes performance dual springs and titanium
   retainers. OK to .500" lift. Price per complete set:
   (6) innersprings, (6) outer springs, (6) retainers,
   (6) spring bases and shims.

Retail $268.77
DP Price $219.95


$219.95

CB650  1979-82
KPMI Valve Stem Seals - Pure Viton®KPMI Viton Valve Guide Seal
     For CB650
KPMI Red 100% Viton® valve stem seals are designed to have optimum fitment, allow for maximum lift, and to give maximum life. Resistant to high temperatures, petroleum products and the corrosive gasses that are the by-products of combustion. These seals retain their ability to seal in situations where other materials could harden and allow oil to enter the combustion chamber causing detonation, carbon build up and a loss of power. The Red Ones are truly the racer’s choice.
    #700-100016, set of (8), 5.5mm stem

    DP Price $39.92
$39.92
CB500 / CB550 1972-78 
KPMI Racing Valve Springs  CB500/550Kibblewhite Valve Springs CB550
   #30-4045
   set of 8, includes inner and outer springs,
   can be used with stock or Ti retainers shown below.
   about KPMI products

   Retail $61.00
    DP Price $59.95


$59.95
KPMI Titanium Retainers  CB500/550Kibblewhite Ti Retainers 30-31551 at Dynoman
   #30-31551
    set of 8
    about KPMI products

   Retail $137.34
    DP Price $119.95






$119.95
KPMI Titanium Retainers & Valve SpringsKPMI Valve Springs and Ti Retainers
     For CB500/550
Buy Both and SAVE!
    #30-31551 and #30-4045
   
Retail $198.00
   
Just $169.95




$169.95
KPMI Valve Stem Seals - Pure Viton®KPMI Viton Valve Guide Seal
     For CB500/550
KPMI Red 100% Viton® valve stem seals are designed to have optimum fitment, allow for maximum lift, and to give maximum life. Resistant to high temperatures, petroleum products and the corrosive gasses that are the by-products of combustion. These seals retain their ability to seal in situations where other materials could harden and allow oil to enter the combustion chamber causing detonation, carbon build up and a loss of power. The Red Ones are truly the racer’s choice.
    #700-100016, set of (8), 5.5mm stem

    DP Price $39.92


$39.92
DP VALVE GUIDESValve Guides for Honda CB550 at Dynoman
     For CB500/550
     Ampco 45, the best material
     available for guides!
     Pre-honed, ready to install
     (Intake and exhaust are the same guides)
     Manufactured in the USA by
     KPMI for Dynoman

     $139.90 for set of (8)
     $79.95 for set of (4)



Set of (8)


Set of (4)

KPMI VALVE GUIDES
   CB500/CB550 Honda
   Set of (4) ~Intake or Exhaust~ Guides KPMI Valve Guides for CB550 Honda
   Must be honed, C63000 Nickel Bronze.
   For complete set, please order quantity (2)
   #30-3150

KPMI retail   $97.00
DP Price   $79.95

*Please disregard the Kibblewhite label on these guides, they are incorrectly shown as fitting the CB500 Twin.

CB350F / CB400F 1975-77
KPMI Racing Valve Springs
   #30-1032
   set of 8

   about KPMI products

    Retail $94.00
  
DP Price $74.95

$74.95
   KAWASAKI
KZ900 / Z-1 1973-77
KZ1000 1977-78
KZ1000 J/K/M 1981-83 and thru 2002 Police
GPz1100 1981-82

KPMI Cam Followers KPMI Tappets
  
#40-1013
   (buckets or tappets)
   MUST be used with Ti Retainers (below)
   shim-on-bottom type #40-1008
   set of (8)
   about KPMI products

   Retail $350.00
    DP Price $319.95

 


$319.95
KPMI Titanium Retainers KPMI Ti Retainers
    #40-1008
    set of 8
    shim-on-bottom type, for use with KPMI Followers
    about KPMI products
   
   Retail $230.00
    DP Price $189.95

 
 

$189.95
KPMI Titanium Retainers 
    #40-1008M
    set of 8
    For use with Original shim-on-top cam followers
    and racing valve springs
    about KPMI products

    Retail $188.00
    DP Price $159.95


 

$159.95
KPMI Hard Anodized Racing RetainersKPMI Retainers
   
#40-1008R
    High Performance Replacement Retainers for
    Kawasaki® KZ™/Z1™ 900 1973-1977
    Hard anodized, use with 15º keepers for radius-groove valves. 
    15º Jumbo Keepers are designed for high spring
    loads in racing applications.
    Set of 8


   Retail $188.00
    DP Price $159.95



$159.95
KPMI Racing Valve Springs  
   #40-1007
   set of 8
   Up to .500" valve lift
   about KPMI products

   Retail $75.95
    DP Price $69.95



$69.95
DP Racing Valve SpringsDynoman Performance
   # DP VS040814
   set of 8, inners and outers included
   Up to .500" valve lift

     DP Price $64.95


$64.95
KPMI Racing Valve Springs 
   #40-1016
   set of 8
   Up to .475" valve lift
   about KPMI products
 
   Retail $75.95
    DP Price $69.95



$69.95
DP Racing Valve SpringsDynoman Valve Springs for KZ
   # DP VS040815
   set of 8, inners and outers included
   Up to .475" valve lift

     DP Price $64.95

$64.95
KPMI OE Replacement Valve Springs 
   #40-0449
   set of 8
   Up to .425" valve lift
   about KPMI products
  
   Retail $75.95
    DP Price $69.95


$69.95
DP Racing Valve SpringsDynoman Performance
   # DP VS040816
   set of 8, inners and outers included
   Up to .425" valve lift

     DP Price $64.95

$64.95

TSUBAKI CAM CHAINSTsubaki Cam Chain at Dynoman

122 Link HD Cam Chain
KZ900 / 1000 thru '80 with 30T sprockets
"Peanut-link" - easier on cam idlers.
 Plain white box - Genuine Tsubaki!
$79.95
 

 


$79.95
TSUBAKI CAM CHAINSTsubaki Cam Chain at Dynoman
124 Link HD Cam Chain

KZ900 / 1000 thru '80 with 32T sprockets (Mark II)
"Peanut-link" - easier on cam idlers
  Plain white box - Genuine Tsubaki!
$79.95


 

$79.95
APE MANUAL CAM CHAIN TENSIONERKawasaki Cam Chain Tensioner at Dynoman
   #KT1100
   Fits: KZ1000J, GPz1100
   $54.95

$54.95
 
APE MANUAL CAM CHAIN TENSIONERKawasaki Cam Chain Tensioner at Dynoman
   #KT1000
   Fits: KZ900, Z-1, KZ1000, KZ650, KZ750,
          GPz750, GPz750 Turbo
   $54.95
 
$54.95

KPMI VALVE GUIDES - INTAKE
   set of (4) Intake Guides, standard size -
   Must be honed, C63000 Nickel Bronze
   #40-0478

KPMI retail   $50.00
DP price    $44.95

Valve Guide Hone

Fits:
KZ650 / KZ750 / KZ900 / KZ1000
KZ900 / Z-1 1973-77
KZ1000 1977-78
KZ1000 J/K/M 1981-83 and thru 2002 Police
GPz1100 1981-82


 
KPMI VALVE GUIDES - EXHAUST
   set of (4) Exhaust Guides, standard size -
   Must be honed, C63000 Nickel Bronze
   #40-0482
  
KPMI retail   $50.00
DP price    $44.95

Valve Guide Hone

Fits:
KZ650 / KZ750 / KZ900 / KZ1000
KZ900 / Z-1 1973-77
KZ1000 1977-78
KZ1000 J/K/M 1981-83 and thru 2002 Police
GPz1100 1981-82


 
KPMI Valve Stem Seals - Pure Viton®KPMI Viton Valve Guide Seal
KPMI Red 100% Viton® valve stem seals are designed to have optimum fitment, allow for maximum lift, and to give maximum life. Resistant to high temperatures, petroleum products and the corrosive gasses that are the by-products of combustion. These seals retain their ability to seal in situations where other materials could harden and allow oil to enter the combustion chamber causing detonation, carbon build up and a loss of power. The Red Ones are truly the racer’s choice.
    #700-100019, set of (8), 7mm stem

    DP Price $39.92



$39.92
KPMI VALVE KEEPERSKPMI Valve Keepers
    Set of (16)
    Replacement Keepers for Kawasaki
    GPz-type 7° OEM

    KPMI Retail $71.21
    DP Price $64.95


$64.95 
KZ650 / KZ750   1976-85
KPMI Valve Springs
   
set of 8
    #40-0893

    Retail $75.95
    DP Price $69.95

(see above for Valve Guides)

$69.95

 
ZRX1100/1200
KPMI Valve SpringsKPMI 40-4611
   
set of 16
    #40-4611

    Retail $143.00
    DP Price $129.95
$129.95

 
   SUZUKI
GS1000 1977-80

KPMI Cam Followers   KPMI Tappets
    #60-1026
   (buckets or tappets)
   set of 8
   MUST be used with Ti Retainers (#60-6106 below),
   shim-on-bottom type, comes with keepers
  
   Retail $374.00
    DP Price $299.95

 
Fits:
1977-1980 Suzuki GS1000 2-Valve
1977-79 Suzuki GS750 2-Valve
1977-79 Suzuki GS550 2-Valve

 


$299.95
KPMI Titanium Retainers  KPMI Ti Retainers
   #60-6106
   set of 8
   must be used with shim-on-bottom cam followers,
   shown above, set includes 15° jumbo keepers.

   Retail $242.00
    DP Price $199.95

Fits:
1977-1980 Suzuki GS1000 2-Valve
1977-79 Suzuki GS750 2-Valve
1977-79 Suzuki GS550 2-Valve


$199.95
DID CAM CHAINSDID Cam Chain at Dynoman
120 Link HD Cam Chain - Made in Japan
GS1100 / 1150 (4-valve)
GS750/850/1000 (2-valve)

1977-78 GS400
1980-88 GS450
1989-96 GS500


$79.95

$79.95 
KPMI Valve Springs
  
set of 8
    #60-0891

    Retail $75.95
     DP Price $69.95

Fits:
1977-1980 Suzuki GS1000 2-Valve
1979-83 Suzuki GS850 2-Valve
1977-79 Suzuki GS750 2-Valve

1977-79 Suzuki GS550 2-Valve

 


$69.95

KPMI Valve Stem Seals - Pure Viton®KPMI Viton Valve Guide Seal
KPMI Red 100% Viton® valve stem seals are designed to have optimum fitment, allow for maximum lift, and to give maximum life. Resistant to high temperatures, petroleum products and the corrosive gasses that are the by-products of combustion. These seals retain their ability to seal in situations where other materials could harden and allow oil to enter the combustion chamber causing detonation, carbon build up and a loss of power. The Red Ones are truly the racer’s choice.
    #700-100019, set of (8), 7mm stem

    DP Price $39.92

Fits:
1977-1980 Suzuki GS1000 2-Valve
1978-79 GS750 2-Valve

$39.92
KPMI VALVE GUIDES  -  INTAKE
    set of (4) Intake Guides
   - standard size -
   Must be honed, C63000 Nickel Bronze
   #60-0860

KPMI retail   $100.00
DP price    $79.95

Fits:
1977-1980 Suzuki GS1000 2-Valve
1978-79 GS750 2-Valve

Valve Guide Hone

KPMI VALVE GUIDES  -  EXHAUST
   set of (4) Exhaust Guides
   - standard size -
   Must be honed, C63000 Nickel Bronze
   #60-0864

KPMI retail   $100.00
DP price    $79.95


Fits:

1977-1980 Suzuki GS1000 2-Valve
1978-79 GS750 2-Valve

  
GS750 4-valve 1981-86
GS1100 E/ES 1981-84
GS1150 E/ES 1984-85
KPMI Titanium RetainersKPMI Ti Retainers
   #60-1034T
   set of 16

    Retail $325.00
     DP Price $249.95

 

$249.95
KPMI Lightweight Racing Valve SpringsKPMI Valve Springs
    #60-1028
    0.390" Valve Lift OK
    50# Seat Pressure / 138 lb. at .039" lift
    set of 16
  
    Retail $187.00
     DP Price $149.95


$149.95
DID CAM CHAINSDID Cam Chain at Dynoman
120 Link HD Cam Chain - Made in Japan
GS1100 / 1150 (4-valve)
GS750/850/1000 (2-valve)
1977-78 GS400
1980-88 GS450
1989-96 GS500
$79.95
 
 $79.95
KPMI Valve Stem Seals - Pure Viton®KPMI Viton Valve Guide Seal
KPMI Red 100% Viton® valve stem seals are designed to have optimum fitment, allow for maximum lift, and to give maximum life. Resistant to high temperatures, petroleum products and the corrosive gasses that are the by-products of combustion. These seals retain their ability to seal in situations where other materials could harden and allow oil to enter the combustion chamber causing detonation, carbon build up and a loss of power. The Red Ones are truly the racer’s choice. For use with
standard stem sized valves (OE).

    #700-100016, set of (16)

   Suggested Retail $89.92
  
DP Price $79.84

$79.84
KPMI VALVE GUIDES
   set of (8) Valve Guides, for complete set order quantity (2)
   Hone-to-fit for superior accuracy,
   For use as intake or exhaust guides.
   #60-1029

KPMI retail   $123.00
DP price    $99.95


  
 
GSXr1300 Hayabusa 1999-2009
KPMI Racing Valve Springs
  
set of 16KPMI
   #60-60560
    Fits stock retainers and bases on 1999-09
    $139.95

$139.95
KPMI OEM Replacement Cam Followers
    (Tappets), set of 16
KPMI Hayabusa Followers
    #60-60014 
    $499.95

$499.95
 
   YAMAHA

FJ1100 1984-85
FJ1200 1986-93

KPMI Valve Springs
    #80-1017
   
set of 16KPMI
   
     Retail $131.00
     DP Price $119.95


$119.95
KPMI Titanium Retainers
    #80-1019
    set of 16
    Shim-on-bottom type for use with #80-1020 cam followers.
    Requires use of 9.5mm shims. Keepers are supplied with Retainers. 
   

    Retail $288.00
     DP Price $219.95



$219.95
V-Max 1985-2007
KPMI Racing Valve Springs
    #80-8021
    set of 16
   
    Retail $131.00
     DP Price $109.95

 
$109.95
KPMI Titanium Retainers
    #80-8023
    set of 16KPMI Ti Retainers
    Use with shim-under style Followers
    Includes Keepers.
    Requires 9.5mm shims

    Retail $288.00
     DP Price $219.95



$219.95
XS1100 1978-81

TSUBAKI CAM CHAINTsubaki Cam Chain at Dynoman
128 Link HD Cam Chain
XS1100 HD Cam Chain
$79.95


$79.95
KPMI Valve Springs
    set of
8
    #80-0449
    $69.95


$69.95

 

ABOUT AMPCO 45™

AMPCO 45 is a high strength alloy with mechanical properties beyond the range of commercial nickel-aluminium bronzes. This is due to its special manufacturing process.
AMPCO 45 is recommended for heavy-duty high-loaded mechanical and corrosive applications.
Typical applications involving abrasive wear, friction, deformation, chemical erosion include:
- aircraft bearings / bushings
- pump and marine shafts and wear rings
- valve spindles and seats
- machine tool parts
The spark-resistance properties make it suitable for safety tools and machine tool components in explosive environments.
Specification: AMS 4640, ASTM B.150

Manufactured by AMPCO METAL   http://www.ampcometal.com

Ampco 45

 

 

 

 

 

 

 

 

 

 

 

 
 
 
For your security and ours, we process
our payments
through Paypal.
PayPal Logo
PayPal Acceptance Mark


2000-17 DynomanPerformance.com
All rights reserved. Prices, descriptions, and products subject to change without notice.

dynoman-performance@austin.rr.com